www.ptreview.co.uk
04
'23
Written on Modified on
Yaskawa News
YASKAWA LAUNCHES YASKAWA CELL SIMULATOR (YCS)
YCS is an engineering tool designed to realize a digital twin environment, supporting customers to solve their challenges by data utilization in parallel in real and virtual environments.
Yaskawa Electric Corporation has developed and launched the YASKAWA Cell Simulator (YCS), an engineering tool based on simulation verification that adapts to the cell area, following the development of the “YASKAWA Cockpit“, a visualization tool and the “YRM-X controller” an integrated controller for cell areas.
Purpose of Launch
In a manufacturing site, not only the improvement of production efficiency but also the variant & variate production and shorter cycles of facility renewal are required by diversifying and increasing the speed of market requirements. In the production equipment especially, the following three points are required.
- At the production preparation phase, minimizing the process to consider the design, facilitating setup and adjustment operations, or reducing lead time for equipment installation
- At the production operation phase, increasing operation rate, reducing maintenance downtime or reducing robot pause time as well as facilitating switching/changes
- Strengthening the ability to respond to frequent cell redesigns, such as by adding or changing new varieties or changing equipment configurations
Yaskawa aims to meet these challenges by offering an “autonomous decentralized cell” that makes it easier to build and improve cells, and enables flexible production facilities that can easily accommodate model addition and volume changes. It has commercialized an engineering tool for cell areas that can be completely engineered by utilizing a virtual environment, from design to launch, to checking the operation of the entire cell, to analyzing and redesigning the operation, with the aim of building this “autonomous decentralized cell “. YCS can contribute to solving various challenges at each phase of the cell system.
Product Features
YCS has the following three features: cell engineering, cell motion analysis, and cell replanning.
1. Cell engineering
In cell engineering, YCS examines and determines the structure of cells in a virtual environment, thereby reducing the process of designing cells and setting them up in manufacturing sites. In addition, it sets up an autonomously decentralized cell system based on the data, from engineering work to verifying the operation of the entire cell, all in one place in the virtual environment. More specifically, it is equipped with A) functions to support the connection settings of devices in a cell, the settings of information boards (a system in which autonomous devices in a cell share data), and the layout settings of devices; B) functions to create and edit cell action plans; C) functions to create and edit programs for tasks that each device performs for a specific purpose; and D) functions to verify the simulation of the entire cell. This enables the minimization of redesign procedures and the facilitation of setup and adjustment tasks in a cell system.
2. Cell motion analysis
In cell motion analysis, users can use the “ideal planning data created in a virtual environment” and “actual data collected and retrieved from a real environment” to effectively analyze the cause of the variance based on the data between the plan and the actual. This function enables users to compare and analyze the time series data of the real environment obtained through YASKAWA Cockpit (YCP) and the ideal time series data created in the virtual environment of YCS, thereby replanning for motion optimization and early detection of the abnormal causes.
3. Cell replanning
It can also support engineering efforts during the setup and replanning phases of a cell system. It is feasible to perform the same work as engineering in a real environment by using a virtual environment and cell engineering functions that are reconstructed using data from a real environment and have small differences from the real environment. In addition, it can be verified more like the real environment as a digital twin by simulating the response performance of peripheral devices. This engineering environment enables analysis and replanning of cycle times by rotating PDCA cycles using data collected in real environments. In this way, cell systems can reduce downtime for maintenance, reduce robot pausing time, and facilitate switching and changing processes.
Product Features
YCS has the following three features: cell engineering, cell motion analysis, and cell replanning.
1. Cell engineering
In cell engineering, YCS examines and determines the structure of cells in a virtual environment, thereby reducing the process of designing cells and setting them up in manufacturing sites. In addition, it sets up an autonomously decentralized cell system based on the data, from engineering work to verifying the operation of the entire cell, all in one place in the virtual environment. More specifically, it is equipped with A) functions to support the connection settings of devices in a cell, the settings of information boards (a system in which autonomous devices in a cell share data), and the layout settings of devices; B) functions to create and edit cell action plans; C) functions to create and edit programs for tasks that each device performs for a specific purpose; and D) functions to verify the simulation of the entire cell. This enables the minimization of redesign procedures and the facilitation of setup and adjustment tasks in a cell system.
2. Cell motion analysis
In cell motion analysis, users can use the “ideal planning data created in a virtual environment” and “actual data collected and retrieved from a real environment” to effectively analyze the cause of the variance based on the data between the plan and the actual. This function enables users to compare and analyze the time series data of the real environment obtained through YASKAWA Cockpit (YCP) and the ideal time series data created in the virtual environment of YCS, thereby replanning for motion optimization and early detection of the abnormal causes.
3. Cell replanning
It can also support engineering efforts during the setup and replanning phases of a cell system. It is feasible to perform the same work as engineering in a real environment by using a virtual environment and cell engineering functions that are reconstructed using data from a real environment and have small differences from the real environment. In addition, it can be verified more like the real environment as a digital twin by simulating the response performance of peripheral devices. This engineering environment enables analysis and replanning of cycle times by rotating PDCA cycles using data collected in real environments. In this way, cell systems can reduce downtime for maintenance, reduce robot pausing time, and facilitate switching and changing processes.
